|
Hull Identification Number
Hull Identification Number
On vessels without transoms, or impractical to use transoms, the HIN must be affixed to the starboard (right) outboard side of hull, aft, within one foot of the stern and within two inches of the top of the hull side, gunwale or hull/deck joint, whichever is lowest. On catamarans and pontoon boats with replaceable hulls, the HIN must be affixed to the aft crossbeam, within one foot of the starboard (right) hull attachment. If you are unable to locate the Hull Identification Number on your vessel, or if your vessel is a homemade boat, please select a Vessel Inspection location. Inspections are conducted by DNR Rangers at locations statewide on a varying schedule. Inspections will not be performed if customers have not paid for a registration in advance of the inspection. For larger vessels moored at a Marina, please contact your DNR Law Enforcement Office here. 
|
All vessels built after 1972 must have a complete Hull Identification Number before the registration can be processed. Please inspect your vessel for the Hull Identification Number. The HIN consists of 12 continuous characters at least one-quarter of an inch in height, uninterrupted by spaces, slashes, hyphens or other symbols. The HIN will be carved, burned, stamped, embossed, molded, bonded, or otherwise permanently affixed to the vessel.
The HIN on vessels with transoms must be affixed to the starboard (right) side of the transom within two inches of the top of transom, gunwale, or hull/deck joint, whichever is lowest. 
